View ZXTD717MC_5031591.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

A Product Line of Diodes Incorporated
ZXTD717MC
DUAL 12V PNP LOW SATURATION TRANSISTORS
Features and Benefits
* * * * * * * * * * * * BVCEO > -12V IC = -4A Continuous Collector Current Low Saturation Voltage (-140mV @ -1A) RSAT = 60 m for a low equivalent On-Resistance hFE specified up to -10A for a high current gain hold up Dual NPN saving footprint and component count Low profile 0.8mm high package for thin applications RJA efficient, 40% lower than SOT26 2 6mm footprint, 50% smaller than TSOP6 and SOT26 Lead-Free, RoHS Compliant (Note 1) Halogen and Antimony Free. "Green" Device (Note 2) Qualified to AEC-Q101 Standards for High Reliability
Mechanical Data
* * * * * * * Case: DFN3020B-8 Case material: Molded Plastic. "Green" Molding Compound. Terminals: Pre-Plated NiPdAu leadframe. Nominal package height: 0.8mm UL Flammability Rating 94V-0 Moisture Sensitivity: Level 1 per J-STD-020 Weight: 0.013 grams (approximate)
Applications
* * * * DC-DC Converters Charging circuits Power switches Motor drive
DFN3020B-8
C2
C1
C2 C2 C1 C1
B2
B1
E2
C2
C1
B2
E1
B1 Pin 1
E2
Top View Bottom View PNP Transistor Equivalent Circuit
E1
PNP Transistor Bottom View Pin-Out
Ordering Information
Product ZXTD717MCTA
Notes:
Marking D11
Reel size (inches) 7
Tape width (mm) 8
Quantity per reel 3000
1. No purposefully added lead. 2. Diodes Inc's "Green" Policy can be found on our website at http://www.diodes.com
Marking Information
D11
D11 = Product type marking code Top view, dot denotes pin 1
ZXTD717MC
Document Number DS31934 Rev. 3 - 2
1 of 7 www.diodes.com
December 2010
(c) Diodes Incorporated
A Product Line of Diodes Incorporated
ZXTD717MC
Maximum Ratings @TA = 25C unless otherwise specified
Characteristic Collector-Base Voltage Collector-Emitter Voltage Emitter-Base Voltage Peak Pulse Current Continuous Collector Current Base Current (Notes 3 & 6) (Notes 4 & 6) Symbol VCBO VCEO VEBO ICM IC IB Value -20 -12 -7 -12 -4 -4.4 1 Unit V
A
Thermal Characteristics @ TA = 25C unless otherwise specified
Characteristic (Notes 3 & 6) Power Dissipation Linear Derating Factor (Notes 4 & 6) PD (Notes 5 & 6) (Notes 5 & 7) (Notes 3 & 6) (Notes 4 & 6) (Notes 5 & 6) (Notes 5 & 7) (Notes 6 & 8) Symbol Value 1.5 12 2.45 19.6 1.13 8 1.7 13.6 83.3 51.0 111 73.5 17.1 -55 to +150 Unit
W mW/C
Thermal Resistance, Junction to Ambient Thermal Resistance, Junction to Lead Operating and Storage Temperature Range
Notes:
RJA RJL TJ, TSTG
C/W
C
3. For a dual device surface mounted on 28mm x 28mm (8cm2) FR4 PCB with high coverage of single sided 2 oz copper, in still air conditions; the device is measured when operating in a steady-state condition. The heatsink is split in half with the exposed collector pads connected to each half. 4. Same as note (3), except the device is measured at t <5 sec. 5. Same as note (3), except the device is surface mounted on 31mm x 31mm (10cm2) FR4 PCB with high coverage of single sided 1oz copper. 6. For a dual device with one active die. 7. For dual device with 2 active die running at equal power. 8. Thermal resistance from junction to solder-point (at the end of the collector lead).
ZXTD717MC
Document Number DS31934 Rev. 3 - 2
2 of 7 www.diodes.com
December 2010
(c) Diodes Incorporated
A Product Line of Diodes Incorporated
ZXTD717MC Thermal Characteristics
2.0
Limited
Max Power Dissipation (W)
IC Collector Current (A)
10
VCE(SAT)
10sqcm 1oz Cu Two active die
1.5
1
DC 1s 100ms 10ms
8sqcm 2oz Cu One active die Single Pulse, Tamb=25C
8sqcm 2oz Cu One active die 10sqcm 1oz Cu One active die
1.0
0.1
1ms 100us
0.5
0.01 0.1
0.0 0 25 50 75 100 125 150
1
10
VCE Collector-Emitter Voltage (V)
Temperature (C)
Safe Operating Area
225 80 60
D=0.5 8sqcm 2oz Cu One active die
Derating Curve
Thermal Resistance (C/W)
Thermal Resistance (C/W)
200 175 150 125 100 75 50 25 0 0.1 1
2oz Cu One active die
1oz Cu One active die 1oz Cu Two active die
40 20
D=0.2 Single Pulse D=0.05 D=0.1
2oz Cu Two active die
0 100
1m
10m 100m
1
10
100
1k
10
100
Pulse Width (s)
Board Cu Area (sqcm)
Transient Thermal Impedance
3.5
Tamb=25C Tj max=150C Continuous 2oz Cu One active die 2oz Cu Two active die
Thermal Resistance v Board Area
PD Dissipation (W)
3.0 2.5 2.0 1.5 1.0 0.5 0.0 0.1
1oz Cu Two active die 1oz Cu One active die
1
10
100
Board Cu Area (sqcm)
Power Dissipation v Board Area
ZXTD717MC
Document Number DS31934 Rev. 3 - 2
3 of 7 www.diodes.com
December 2010
(c) Diodes Incorporated
A Product Line of Diodes Incorporated
ZXTD717MC Electrical Characteristics @TA = 25C unless otherwise specified
Characteristic Collector-Base Breakdown Voltage Collector-Emitter Breakdown Voltage (Note 9) Emitter-Base Breakdown Voltage Collector Cutoff Current Emitter Cutoff Current Collector Emitter Cutoff Current Symbol BVCBO BVCEO BVEBO ICBO IEBO ICES Min -20 -12 -7 300 300 180 60 45 100 Typ -35 -25 -8.5 475 450 275 100 70 -10 -100 -100 -195 -240 -0.87 -0.97 21 110 70 130 Max -100 -100 -100 -17 -140 -150 -300 -310 -0.96 -1.07 30 Unit V V V nA nA nA mV mV mV mV mV V V pF MHz ns ns Test Condition IC = -100A IC = -10mA IE = -100A VCB = -16V VEB = -6V VCES = -10V IC = -10mA, VCE = -2V IC = -100mA, VCE = -2V IC = -2.5A, VCE = -2V IC = -8A, VCE = -2V IC = -10A, VCE = -2V IC = -0.1A, IB = -10mA IC = -1A, IB = -10mA IC = -1.5A, IB = -50mA IC = -3A, IB = -50mA IC = -4A, IB= -150mA IC = -4A, VCE = -2V IC= -4A, IB = -150mA VCB = -10V. f = 1MHz VCE = -10V, IC = -50mA, f = 100MHz VCC = -6V, IC = -2A IB1 = IB2 = -50mA
Static Forward Current Transfer Ratio (Note 9)
hFE
Collector-Emitter Saturation Voltage (Note 9)
VCE(sat)
Base-Emitter Turn-On Voltage (Note 9) Base-Emitter Saturation Voltage (Note 9) Output Capacitance Transition Frequency Turn-on Time Turn-off Time
Notes:
VBE(on) VBE(sat) Cobo fT ton toff
9. Measured under pulsed conditions. Pulse width 300 s. Duty cycle 2%
ZXTD717MC
Document Number DS31934 Rev. 3 - 2
4 of 7 www.diodes.com
December 2010
(c) Diodes Incorporated
A Product Line of Diodes Incorporated
ZXTD717MC Typical Electrical Characteristics
0.25
Tamb=25C IC/IB=50
100m
0.20
VCE(SAT) (V)
VCE(SAT) (V)
IC/IB=100
0.15 0.10 0.05 0.00 1m
100C 25C -55C
10m
IC/IB=50 IC/IB=10
1m 1m
10m
100m
1
10
10m
100m
1
10
IC Collector Current (A)
IC Collector Current (A)
VCE(SAT) v IC
1.4 1.2
100C VCE=2V
VCE(SAT) v IC
630
1.0
IC/IB=50
VBE(SAT) (V)
1.0 0.8 0.6 0.4 0.2 0.0 1m 10m 100m 1 10
-55C 25C
450 360 270 180 90 0
Typical Gain (hFE)
540
Normalised Gain
0.8
-55C
0.6
25C 100C
0.4 1m 10m 100m 1 10
IC Collector Current (A)
IC Collector Current (A)
hFE v IC
VBE(SAT) v IC
1.0 0.8
VCE=2V
VBE(ON) (V)
-55C
0.6
25C
0.4 0.2 1m
100C
10m
100m
1
10
IC Collector Current (A)
VBE(ON) v IC
ZXTD717MC
Document Number DS31934 Rev. 3 - 2
5 of 7 www.diodes.com
December 2010
(c) Diodes Incorporated
A Product Line of Diodes Incorporated
ZXTD717MC
Package Outline Dimensions
A A1 D
A3
D4 E Z L b D2
D4
E2 e
DFN3020B-8 Dim Min Max Typ A 0.77 0.83 0.80 A1 0 0.05 0.02 A3 0.15 b 0.25 0.35 0.30 D 2.95 3.075 3.00 D2 0.82 1.02 0.92 D4 1.01 1.21 1.11 e 0.65 E 1.95 2.075 2.00 E2 0.43 0.63 0.53 L 0.25 0.35 0.30 Z 0.375 All Dimensions in mm
Suggested Pad Layout
C
X Y1
G Y2
G1
Y
X1
Dimensions C G G1 X X1 Y Y1 Y2
Value (in mm) 0.650 0.285 0.090 0.400 1.120 0.730 0.500 0.365
ZXTD717MC
Document Number DS31934 Rev. 3 - 2
6 of 7 www.diodes.com
December 2010
(c) Diodes Incorporated
A Product Line of Diodes Incorporated
ZXTD717MC
IMPORTANT NOTICE
DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION). Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated website, harmless against all damages. Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel. Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application. Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings noted herein may also be covered by one or more United States, international or foreign trademarks.
LIFE SUPPORT
Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein: A. Life support devices or systems are devices or systems which: 1. 2. B. are intended to implant into the body, or support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user.
A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or to affect its safety or effectiveness.
Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devicesor systems-related information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems. Copyright (c) 2010, Diodes Incorporated
www.diodes.com
ZXTD717MC
Document Number DS31934 Rev. 3 - 2
7 of 7 www.diodes.com
December 2010
(c) Diodes Incorporated

▲Up To Search▲

Price & Availability of ZXTD717MC

	To Download ZXTD717MC Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .